Mangrove Jack's DUAL TEMPERATURE CONTROLLER, Инструкция по эксплуатации

Страница: 5 / 8

Setting a Temperature
1. Press the Set button and hold for 3 seconds. The Set indicator light
on the screen will appear.
2. Press Set button again. The temperature displayed on the screen
now is the target temperature.
3. While holding in the Set button, use the Up or Down buttons to enter
a desired target temperature.
4. Once you reach your desired target temperature, press the Power
button to set that temperature. You will then return back to the main
screen.
The temperature displayed on the screen under normal working
status shows the current temperature.
Button Press Once Hold for 3 Seconds Holding Continuously
Power Switch controller on and off.
Set Select, or finish step. Indicator light will appear. Hold the Set button and
pressing either the up or down
to enter target temperature.
Up Display target temperature.
Down Display the hysteresis value.
MANGROVE JACK’S DUAL TEMPERATURE CONTROLLER