Manfrotto MVG300XM, Инструкция по эксплуатации

Страница: 4 / 9

Motor lock
4
Each of the three rotating axes has one
positioning lock for convenient positioning and
storage purposes.
Be sure to unlock them before using the
gimbal.
You can refer to the above steps to mount the portrait fixing plate according
to needs.
Be sure the battery and memory card are already
installed before installing the camera.
Installing the camera
5
① Please lock the gimbal at the balanced lock status(as Figure 4-1), install the
camera on the quick release plate and unlock the safety lock with the fixed plate
safety lock.
② Install the camera onto the quick release plate as close as possible to the
sliding arm, adjusting the fixed plate slider.
③ Lock the safety lock.
The position of the sliding block can be adjusted according to the size of the
camera, and the higher block selected.
Gimbal balancing
6
Take the balancing adjustment of horizontal as an example.
Before balancing the gimbal, please lock the gimbal at the balanced lock
status, then unlock each axis position lock by stages.
TIPS
(
1)The lens cover should be removed from the camera and the memory card needs to
be inserted into the camera to complete all the connections. This ensures the camera
is ready for shooting.
(2) During balancing the gimbal, make sure the camera and gimbal are all power off.
(3)If you need to add accessories after the balance is completed, gimbal needs to be
re-balanced again.
(4) Balanced standard: the camera will remain stable at any angle.
Lock
Unlock
Gimbal configuration
1
3
2
Charging with USB2.0 to Type-C supports fast charging.
charging port can be charged simultaneously.
Charging
3
Be sure to fully charge the gimbal before first use.
If the battery is very low, we suggest you charge it straight away.
Only for
handle charging
1
1
2
2
1 2
Gimbal and handle
charging when connected.
If disconnected, only for
gimbal charging.
Figure 4-2 Figure 4-1
4
Balanced lock Stored lock