M&W BHSF002, Руководство пользователя

Страница: 2 / 11

Advice for the setup:
persons
of adherence can cause serious injuries.
so that the screw grips on its own
all elements loosely. The screws must only be
with each other in this
or the welded
and connects
way. Otherwise the setup
joints, which always occur with
DO’S
1. Check the delivery content for completeness. Future complaints cannot be accepted.
Because of the size of the product, we suggest to set it up at the spot where it will be used in the future.
When you are ready for the setup, make sure to have all the necessary tools at hand and that you have much space as well as a clean and
dry spot for the montage.
When the product is completely set up, check control this regularly.
Make sure that this product is completely usage.
Make sure that all legs make contact with the ground. Otherwise a danger could occur.
For cleaning use a sponge and warm soapy water. Don´t use any solvent-containing cleaner or detergents as for instance bleach can damage
the product.
In case you have purchased seat pads or cushions with this product, please note that the water-
out of the fabric in the process of washing. Your local laundry shop will be able to advise you
Tip for stain removal:
Avoid washing by machine! First try to wash out the stain on the spot with lukewarm soapy water (without aggressive detergents).
the cushion.
The wicker products are designed for a usage with suitable seat pads or cushions. If using without seat pads or cushions damages can occur.
INSTRUCTIONS
Don´t use any hard brushes which
Don´t use this product if parts are missing, damaged or worn down.
Don´t use any electronic tools to set up these products. The high energy of these electronic
set up. You shouldn´t sit or stand
Never use abrasive cleaner or chemical detergents.
Don´t let your product stand in the rain. Protect
over the winter, we suggest you to store
the products in a covered dry place.
DONT’S
tools causes screws to overtighten and
on the tables.
Attention!
Caution,risk of injury!
1.
2.
3.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
1.
2.
3.
4.
5.
afterwards, small deviations of the borehole
Please note that at fist all screws