5
REMOTE STATION with MONITOR - CONTROLS AND
FEATURES
The illustration below shows the controls and features used to operate the N14 remote
station model.
1. Speaker/Microphone
2. Speaker Volume
3. Monitor
4. Door listen
5. Room talk
6. Door talk (Press both buttons)
6
MUSIC LEVEL
Remove MONITOR button to reveal
MUSIC level adjustment.
Use a small flat-bladed
screwdriver to adjust
MUSIC LEVEL
MUSIC level.
SETTING UP YOUR SYSTEM
System Volume Control
- This control is located only on the master speaker. The
normal range is between 12 and 1 o'clock.
Speaker Volume Control
- The normal setting for speaker volume control knobs is
the maximum clockwise position. Speaker volume controls should only be turned down
to make a particular room quieter than others.
Chime Volume
- Chime volume was set during installation but may be changed if
necessary. Before changing the chime volume, be sure all speaker volume controls are
at their maximum positions when you test the volume level. To adjust the chime volume,
remove the master speaker from the wall and turn the chime volume control on the back
with a small flat-bladed screwdriver.
Music Volume
- Music volume can be controlled by the system volume control.
However, the system volume control also affects the intercom communications volume
level. A separate volume control for the music is contained inside the master speaker.
This can be adjusted for softer background music while still maintaining intercom
communications at the desired level. Be sure all speaker volume controls are at the
maximum and the system volume has been set to the desired level before adjusting the
music volume. To adjust the music volume, carefully remove the monitor button (door
release on MC111DM) and adjust the volume using a small flat-bladed screwdriver.
