MANDREL welder EErgo, Инструкция по эксплуатации

Страница: 3 / 36

3
This operating manual describes the paddle welding tool in all its product varia-
tions. The exact product identifi cation can be found on the product. Please make
sure, the product fi ts your application. If applicable just sections of the instruc-
tion manual might be signifi cant for several products. Indication can be found at
the corresponding sections.
1.0 EXPLANATION OF SYMBOLS
Symbols used on the device and in the operation manual and their respective
meanings:
Caution! Warning of a potential danger. Please follow operation manual.
Caution! Hazardous voltage, danger of electric shock.
Caution! Hot surface.
Attention. Please observe under any circumstances.
Protection class I according to DIN EN 61140 (VDE 0140-1). All electrical-
ly conductive housing parts are connected with the protective conductor.
Mark of conformity, confi rms compliance with the currently valid EMC
directive (2014/30/EU), the standard EN 61326-1 and the low voltage
directive (2014/35/EU) DIN EN 60335-1.
Unit complies with directive (2012/19/EU) WEEE. Do not dispose of unit
in household garbage, but dispose of at recycling center for electric and
electronic end-of-life equipment.