Mando Footloose user manual
22
English
A new way of moving
23
1) Unscrew the bolt in the band part (use a
Phillips screwdriver).
3) Fasten the bolt after adjusting the
degree of fixation and angle (The angle
of the reflecting light should be perpen-
dicular to the ground).
2) Place the band part on the seatpost.
4) Installation completed.
2) Place the bell on the handlebar by pull-
ing the band part of the bell.
4) Installation completed.
3) Fasten the bolt with the nut by screwing
it clockwise.
1) Check if all components are in the pack-
age; a bell, Phillips bolt and a nut.
How to place a bell
How to place a rear reflecting plate
Be cautious, the nut easily falls off during installation.
How to use the stand
1) Place the pedal parallel with the ground.
2) Pull a rod with hand.
4) Move the rod until it is placed as shown
in the picture.
3) Move the rod while pulling it.
5) Fix the rod to the ‘stop’ position of the
stand holder.
6) Repeat the same steps for the other rod.
7) Place the unfolded stand on the ground
so the rods stretch to the ground (When
folding the stand, follow the steps in
reverse order).
The maximum load capacity of the stand is 25 kg. If you ride on Mando Footloose or put
too much force on the product while it is on the stand, the stand may be damaged.
H
H
Accessories
Accessories
