Mandik MSD, Техническая документация инструкция

Страница: 22 / 49

MSD - multi smoke damper Page 22 Version 2022-12-20
TPM 159/22
1 MSD - design „A1‟ → see pages 47 to 48
2 Gypsum wall construction separating FIRST fire
compartment from following compartment
3 Ablative Coated Batt (e.g. Firestop Board HILTI CFS-CT
B 1S 140/50 - min. density 140 kg/m
3
+ Firestop acrylic
sealant HILTI CFS-S ACR or equivalent)
4 Fire stop coating thickness 1 mm (e.g. HILTI CFS-CT,
PROMASTOP-CC or equivalent)
5 Fixing profile with threaded rod → see pages 27 to 30
Dividing construction between SINGLE / MULTI duct - Ablative Coated Batt
EIS 90
1 MSD - design „A‟ → see pages 47 to 48
2 Gypsum wall construction separating FIRST fire
compartment from following compartment
3 British gypsum thistle bond 60 (or equivalent can by
used) minimum density 670 kg/m³
4 Fixing profile with threaded rod → see pages 27 to 30 *
Dividing construction between SINGLE / MULTI duct - mortar or gypsum
EIS 120
* This installation was tested without supports. Supports can be
used on wall manufacturers guidance, or after national standards.
Installation in gypsum wall SINGLE / MULTI
X
≥ 50
X
≥ 125
SECOND
FIRE COMPARTMENT IN
DIRECTION OF
EXHAUST HEAT AND
SMOKE
FLOW DIRECTION
(only applies for smoke
extraction)
Following duct MULTI
acc. to EN 1366-8
Connection detail
→ see page 32
Following duct
SINGLE
acc. to
EN 1366-9
Connection detail
→ see page 32
FIRST
FIRE COMPARTMENT
IN DIRECTION OF
EXHAUST HEAT AND
SMOKE
X
X
SECOND
FIRE COMPARTMENT IN
DIRECTION OF
EXHAUST HEAT AND
SMOKE
FLOW DIRECTION
(only applies for smoke
extraction)
Following duct MULTI
acc. to EN 1366-8
Connection detail
→ see page 33
Following duct
SINGLE
acc. to
EN 1366-9
Connection detail
→ see page 33
≥ 100
FIRST
FIRE COMPARTMENT
IN DIRECTION OF
EXHAUST HEAT AND
SMOKE