Mandik CP-M-B, Руководство пользователя

Страница: 8 / 10

KJM MANDÍK Controlling with CPM Wall-Mounted Control
NONO_CP-M-B_2019-6 www.mandik.cz
8
.
The desired temperature correction value can be changed using the rotary knob
on the control - position
D . The rotary knob corrects the desired temperature
from the nominal temperature. The nominal temperature is set for each
Comfort or Attenuation mode in menu Components

Temperature
Control . The minimum and maximum correction is set in menu Input/Output
Assignment

External Switches

Desired Temperature Min Max . The
standard setting for Min and Max is 5 °C.
The status of the air-conditioning unit is indicated by the
Run (position A) and
Fault (position B) LEDs.
Status Meaning
OFF The unit is switched off.
Flashing with
a period of 1
sec.
The unit is in the Start auxiliary mode, which is preparing the unit to
start the fans.
ON The unit is started by the fan speed control knob position and the
Start auxiliary mode has ended.
Flashing with
a period of 3
sec.
The unit has started automatically based on the assessed need for
frost protection or room ventilation and the
Start auxiliary mode has
ended. When the conditions that caused the unit to start up are met,
the unit switches itself off. This status only occurs if the speed control
knob is in the
OFF position and the Climatix controller is preset to the
Tempering mode.
Status Meaning
OFF No fault has occurred.
Flashing Indicates that a new fault has occurred.
ON Indicates a fault that persists after acknowledgment by the
operator.
The LED functions described above are standard ones and can be customized
according to client requirements.
Desired
temperature
correction
Unit status
Run LED
Fault LED
Note