KJM MANDÍK
–
Detailed operating instructions
M&C KJMPNO 07/2022
MANDÍK, a.s.,
5
1
General information
The following abbreviations are used in this manual:
M&R - Measurement and control system
Controller - Siemens Climatix control unit located in the switchboard cabinet of the
measurement and control system
Components - the AC unit assembly consists of the individual components controlled by
the M&C.
This manual uses graphics and symbols to highlight specific details. They include:
This symbol indicates a potentially hazardous situation and an imminent health or
safety hazard to personnel, AC unit, or its components.
This symbol indicates an important detail related to proper installation, commissioning
or maintenance of the unit or its components. It may also indicate a suggestion or a
note concerning installation, commissioning, or maintenance.
This manual contains instructions for setting up and operating the M&C of the MANDÍK M, P, S,
and T series AC units.
This manual must be read and then followed before starting work on the M&C.
Compliance with this manual is a condition for proper operation, function and
fulfilment of warranty conditions. The manufacturer is not liable and the user bears
all risks for any damage resulting from improper use.
This manual is intended for personnel with valid authorisation and licenses to conduct service
work on ventilation and air handlers.
Any arbitrary changes to the M&C switchboards that have not been approved in
advance by MANDÍK, a.s. will result in the termination of the warranties provided
and the termination of the guarantee of safe use and operation.
It is recommended to switch off the control box with the controller only for a short
period of time, because even if the AC unit is switched off, the controller performs
some control functions! If the controller is switched off for a long period of time
(more than 3 days), time may be lost in the controller and consequently the
functioning of the AC unit according to the time program may be disturbed.
This description is valid for M&C with the Climatix controller with software
29.01AHU or higher! The software version is in the
ApplicationInfo
menu on the
display home screen.
