M&C TEC1 Series, Руководство по эксплуатации, Страница: 4 / 78

4
INTRODUCTION
The product described in this operating manual has been inspected and tested prior to shipment from our
factory to insure proper function, finish and conformance with safety requirements. For safe operation and
trouble-free service it is important to heed the notes and warnings made in this operating manual. Transport
and storage environments must not exceed the conditions detailed on the specifications page. Installation and
service must be performed by qualified individuals with adequate training for safety, and installation and
operation of electrical equipment in an industrial environment.
SAFETY INSTRUCTIONS
Definition of Symbols
Risk of Danger
WARNING – EXPLOSION HAZARD – DO NOT DISCONNECT EQUIPMENT UNLESS POWER HAS
BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE NON-HAZARDOUS.
WARNING – EXPLOSION HAZARD – SUBSTITUTION OF COMPONENTS MAY IMPAIR
SUITABILITY FOR HAZARDOUS AREA INSTALLATION.
IF THE EQUIPMENT IS USED IN A MANNER NOT SPECIFIED BY THE MANUFACTURER, THE
PROTECTION PROVIDED BY THE EQUIPMENT MAY BE IMPARED PER CLAUSE 5.4.4(i) IN
STANDARD ISA 61010-1.
RISK OF DANGER CAUTION SYMBOL INDICATES INJURY MAY OCCUR IF MANUFACTUER’S
INSTRUCTIONS ARE NOT ADHERED TO. PLEASE READ MANUAL CAREFULLY WHEN SYMBOL
IS DISPLAYED.
Risk of Electrical Shock
RISK OF ELECTRICAL SHOCK CAUTION SYMBOL INDICATES ELECTRICAL SHOCK RISK.
CAUTION SHOULD BE TAKEN BEFORE DISCONNECTING OR CONTACTING ANY ELECTRICAL
CONNECTIONS.