M&C GenTwo PMA1000V2.4, Инструкция по эксплуатации

Страница: 58 / 110

57
GenTwo® PMA1000 V2.4 | 1.00.00 www.mc-techgroup.com
Note
You need to tap on the Home button M2 to re-initialise the internal
data bus and to set all DO and relay-output settings back to the initial
values. A 60 seconds reset phase starts.
This reset is necessary to delete the test data.
„
C = Service
Fig. 64: Service settings
After pressing the “1=Operational hours counter” button, a screen opens with the channel
selection wheel, the hour counter and a reset button.
Note
The operating hours counter of the analyzer cannot be reset by the
user.
8.3.12 M5/S1 and M5/S2 calibration menu
„
Calibration screen
Fig. 65: Gas calibration screen