24
The manufacturer does not supply warning plates as standard equipment for the machine.
Warning plates are commercially available.
After fixing the plates, connect the electrical cables of the light and signalling device to
the tractor's electrical socket.
Always adapt your driving style to the road conditions to avoid accidents and damage to
the drive system. Take into account your own skills and traffic intensity, visibility, and
weather conditions.
Clean the implement from soil residues and check the lights before
transporting it. Lift the implement and check the clearance between the lowermost
part of the implement and the ground which shall be minimum 30 cm. Be particularly
careful during overtaking other vehicles, driving around obstacles and driving through
large bumps on the field and dirt roads.
CAUTION! Travelling on public roads without warning marks and lights
required by law may result in an accident!
CAUTION! While transporting the roller attached to the rear-mounted three-
point hitch, only tractors equipped with a set of front axle weights are
allowed.
8. Disassembly and withdrawal from service and scrapping
When operated in accordance with the guidelines in the instruction manual, the
implement will have a long life, however worn or damaged parts must be replaced. In case
of serious damage (broken and deformed sections), which deteriorates the implement
operation and causes a hazard during further use, the implement shall be scrapped.
Disassembly of the implement should be carried out by persons who are familiar with its
construction. These operations must be performed when the machine is placed on level,
firm ground. Start by removing the small parts (bolts, screws, etc.) and proceed to the
bigger ones. The implement should be scrapped after complete disassembly and
verification of the machine components. During disassembly, group the parts by material
type. Waste
ferrous metal parts should be grouped together at the collection points for
ferrous metals. Dispose of worked oil, rubber pads and hoses as waste and hand them over
to the disposal companies.
CAUTION Take all precautions during the disassembly: use appropriate
tools and personal protective equipment. Dispose of the disassembled
parts in accordance with the environmental protection requirements.
9. Knife roller spare parts
In order to search, find prices and order original spare parts visit our website at
www.mandam.com.pl, "parts" tab.
There you can find catalogues and spare part sheets in PDF format, containing current
part drawings and diagrams for each machine or implement, together with part numbers
and prices.
