Manaras OHJ, Руководство по установке

Страница: 22 / 48

22
9 Operator Start-up
WARNING
To reduce risk of SEVERE INJURY or DEATH to persons:
•
Personnel should keep away from a door in motion and keep the moving door in sight until it is
completely closed or opened. NO ONE SHOULD CROSS THE PATH OF A MOVING DOOR.
•
Never go under a stopped, partially opened door.
1. Turn power ON.
2. Use the wall-button station (Open/Close/Stop), external entrapment device or jumper wires for testing, see
Table 6.
Table 6 - Start-up and Testing Guide
Test Door Position Action Door Response
Open
Door at 6” from the
closed position
1. Press “OPEN”
OR
Momentarily touch #3 & #4 on the
main terminal with a jumper wire.
2. Check if door is stopped by Open
limit switch.
3. If required, re-adjust Open limit, as
shown in Figure 17, p.13.
Door should open instantly.
Close
Door at fully open
position
1. Press “CLOSE”
OR
Momentarily touch #3 & #5 on the
main terminal with a jumper wire.
2. Check if door is stopped by Close
limit switch.
3. If required, re-adjust Close limit,
as shown in Figure 17, p.13.
- C2 mode: Door should close as long
as the close button is activated.
- B2 mode: Door should close
instantly.
Sense
Edge
A) Door at fully
closed position
Activate external entrapment device
OR
Momentarily touch #3 & #6 on the
main terminal with a jumper wire.
Door should stay at closed position.
B) Door is closing
(movement)
Door should stop and then reverse to
fully opened position.
Open &
Close
(single-
button
radio)
A) Door at fully
opened position Activate the single-button transmitter
OR
Momentarily touch #7 & #8 on the
main terminal with a jumper wire.
Door should close.
B) Door at fully
closed position
Door should open.
C) Door is closing
(movement)
Door should reverse to fully opened
position.
For technical support, please call 1-800-361-2260 or visit www.manaras.com for more information