27
1
Quick Fix Instructions
Table 7 - Basic Troubleshooting Guide ~ from floor level
Symptom
Suggested Action
Fix Problem
Door doesn't respond
to any command
Chain hoist is in engaged position
(if applicable).
➔
Return the chain to its neutral position
(electrical mode). Refer to p.11 for further
details.
Disconnect chain is in engaged position
(if applicable).
➔
Release tension from the disconnect
chain and secure the chain keeper. Refer
to p.11 for further details.
“Stop” button is stuck.
➔
Press and release any “Stop” button.
No power supply.
➔
Verify the incoming power line from
the main breaker, making sure it has not
tripped or blown a fuse.
Door doesn't respond
to “Close” or radio
commands
Photo cells are not properly aligned or are
obstructed.
➔
Clear the obstruction or re-align photo
cells.
Loop is obstructed (presence of metal).
➔
Clear the obstruction.
Door doesn't
respond to any radio
command
No power supply. (transmitter light is OFF)
➔
Replace transmitter's battery.
Poor radio control range.
➔
Bring the radio transmitter closer to
the operator.
Photo cells are not properly aligned or are
obstructed.
➔
Clear the obstruction or re-align photo
cells.
For technical support, please call
1-800-361-2260
for more information
Содержание OHJ
Страница 45: ...45 Notes For technical support please call 1 800 361 2260 or visit www manaras com for more information...
Страница 46: ...46 Notes For technical support please call 1 800 361 2260 or visit www manaras com for more information...
Страница 48: ...Reg T M of 9141 0720 Qu bec Inc BOOK1419 REV 3 2017 03 24...
