Man D2862 LE221, Руководство по ремонту

Страница: 131 / 420

COMMON RAIL SYSTEM
HIGH-PRESSURE PUMP/HIGH-PRESSURE PUMP DRIVE
Removing, installing the high-pressure pump/high-pressure pump drive
Additional jobs
–
Removing, installing the combination air lter, see 187
– Removing, installing engine control units, see 27
– Removing, installing the combination air lter holder, see 193
– Removing, installing the engine wiring harness, see 25
– Removing, installing the charge air manifold, see 181
– Removing, installing the cooling system, see 55
– Removing, installing the fan V-belt, see 85
– Removing, installing the ramfan, see 61
– Removing, installing the intermediate ange, see 63
– Removing, installing the fan tensioning pulley, see 89
– Removing, installing the fan carrier with fan bearing, see 91
– Removing, installing the coolant pump coolant manifold, see 73
– Removing, installing fuel lines, see 141
– Removing, installing coolant lines, see 65
(1) High-pressure pump, master (2) High-pressure pump, slave
Technical data
Mounting bolts, high-pressure pump ................................................................................................60 Nm
High-pressure line (initial use) ............................... M14x1.5 ........................................ Initial torque 10 Nm
High-pressure line (initial use) ............................... M14x1.5 .........................................Final tightening 60°
High-pressure line (reuse)..................................... M14x1.5 ........................................ Initial torque 10 Nm
High-pressure line (reuse)..................................... M14x1.5 .........................................Final tightening 30°
AE6 3st edition 129