Man D 0824 LE 201 Скачать руководство пользователя страница 7

For data see original declaration

If required this declaration is enclo-
sed with the delivery note.

Declaration

7

Declaracion

In accordance with Article 4, paragraph 2, in conjunction with Appendix II, section B, of
Directive 89/392/EEC, version 93/44/EEC

MAN Nutzfahrzeuge Aktiengesellschaft,

hereby declares that the engine described below is destined for installation in a machine
as defined in the EC directive on machines.

Engine model:

Design:

Engine number:

Rating / speed:

Note:
The manufacturer of the complete ready-to-use machine in which this engine is to be
installed must take the further action necessary in the context of indirect safety-re-
lated engineering and provision of instructions to ensure that the ready-to-use ma-
chine complies with the requirements of the EC directive on machines.

The engine must not be put into operation until the complete machine satisfies the
conditions laid down in the EC directive on machines 89/392/EEC, most recently
amended by 93/44/EEC, or the latest amendment of said directive.

MAN Nutzfahrzeuge Aktiengesellschaft

Vogelweiherstraße 33

D–90441 Nürnberg

Содержание D 0824 LE 201







































Отзывы: