41
40
S E A R C H M O D E
6.3 Standard Mode
As soon as the device is switched to SEARCH, it is
operating in standard mode. This mode enormously
facilitates a rapid location
of a buried subject.
The described standard search mode is based on
the «Advanced Profile». Concerning the search
mode of the «Basic Profile», please consult the
«Quick Reference».
6.3.1 Transceiver Operation
6.3.2 Search for a Single Buried Subject
Using the Standard Mode
Coarse Search
The analog tone is the first signal that is received at
long distance.
If the distance to the buried subject is less than
approx. 60 meters, the distance and direction are
displayed. The sensitivity (volume) of the receiver is
adjusted automatically to optimize the processing of
the signal.
Interpretation of the Distance Indication
The distance indication shows the longest possible
distance to the buried subject in meters. The buried
subject may be much closer, but never ever further
apart from the rescuer.
The distance can never be determined exactly. It is
important whether the numbers are increasing or
decreasing. The closer you are to the transmitting
device, the more precise the indicated distance is.
Practical Search Instructions
Hold the transceiver horizontally in front of you
and proceed in the direction indicated by the
arrow. If the distance increases, you are moving
away from the victim. Continue the search in the
opposite direction.
The transceiver will lead you to
the buried subject quickly and reliably.
Do not move backwards, otherwise the direction
indication will be incorrect.
Start the search at a high speed and reduce your
speed as you close in on the buried subject. Oper-
ate the transceiver in a quiet and concentrated
manner – avoid rapid movements. This way, you
will reach the objective in the quickest and easiest
manner!
The
-
key is used to
manually select a spe-
cific buried subject.
If none of the buried
subjects are selected,
the device displays the
symbol for the signal
search
and advises
you to search the ava-
lanche for additional
signals.
If you are in close
proximity (< 6.0) of a
buried subject, you can
mark that location by
pressing the
-
key.
Start
Above approx. 60 meters:
Signal search with analog tones
Above 3 meters:
Coarse search with
distance and direction
indication
Below 3 meters:
Fine search with
cross bracketing
User interface in the standard mode
