Quick Reference Guide
After cleaning and disinfecting, place the holster into the
charging base. The holster will emit a two-tone beep to indicate
correct placement into the base.
When charging, set the holster on top
of this guide for quick, easy reference.
Holster Inside Charger
SOLID
= Battery is fully charged.
FLASH
= Battery is charging.
FLASH
=
Battery is charging. Holster must remain on charging base.
Holster Outside Charger
SOLID
= Adequate charge available.
FLASH
= Sufficient charge to complete one procedure.
SOLID
= Insufficient charge. Return holster to charging base.
• Ensure the probe is outside the patient.
• Disassemble and reassemble the probe and holster.
• If the problem persists, replace with a new probe.
• Press any biopsy button and re-check the indicator
lights.
• If the problem persists, remove probe and return
holster to charging base (ensuring proper seating).
If the battery indicator light is not illuminated:
If the fault indicator light is illuminated:
Troubleshooting
Charging the Holster
