MAMMOTH MOUNTS 4 Bike Rack, Руководство пользователя

Страница: 4 / 7

Step 4
Install the upper and lower horizontal bars as shown
in figure 3 using 1/2” x 3 1/2” bolts, nylock nuts and
washers. The upper horizontal bar should be posi-
tioned so that the hole spaced closest to the outside
edge is on the right hand side of the rack and the
angled face of the bracket is facing downwards. The
lower horizontal bar should be positioned so that the
wheel brackets are on top of the bar.
Step 5
Install the handle bar brackets using the provided
3/8” carriage bolts, washers and nylock nuts as
shown in figure 4.
Figure 3
Figure 4
Step 6
Once all of the bar brackets are installed check all of
the bolts on the entire rack to ensure everything is
tight.
Step 7
You are now ready to rack and roll! Enjoy your new
Mammoth rack.
Replacment parts can be purchased at
www.mammothmounts.com