Mamiya RB67 Pro SD, Руководство пользователя

Страница: 11 / 43

4 . Attaching and Removing the Lens
After cocking the mirror and the lens
shutter, mount the lens on the camera body.
Cocking the mirror
1. Remove the front body cap from the
camera body.
2. Be sure that the mirror is in the cocked,
down position in the camera body, shielding
the film plane from exposure to light.
If the mirror is up, cock the mirror by fully
pushing down the shutter cocking lever toward
the front of the camera.
Cocking the lens shutter
1. Remove the rear cap of the lens by turning
the bayonet ring clockwise.
2. Cock the lens shutter. Firmly turn the shut-
ter cocking pins with your fingers, to the red
dots (A) of the cocking position,
l
If the cocking pins are not fully turned to the
red dots (A), the shutter will not be com-
pletely cocked.
l
The shutter is always cocked on a lens that
has been removed from the body.
Attaching the lens
1. Turn the bayonet ring counterclockwise,
and align the white dot on the bayonet ring
with the red mark at the center of the lens
mount.
2. Mount the lens, keeping the red mark
aligned with the red mark on the body; then
firmly twist the bayonet ring clockwise. The
camera and lens are now set.
NOTE:
Do not place the camera on its back without the rear body cap or film holder being in place.
Otherwise the coupling mechanism may be damaged!
.
9