Mamiya 645E, Инструкция по эксплуатации

Страница: 4 / 25

2
Caution

Do not let the battery’s terminals contact any metal objects or carry or store the battery with any metal
object.

When storing and disposing of the battery, apply tape to the terminals so they cannot contact other
objects.

Do not charge the battery, take it apart or subject it to heat.

Remove a spent battery from the camera immediately.

Use a tripod of sufficient strength to support the camera, lens and any accessories attached to the
camera.

Fasten the neck strap securely to the camera body’s strap lugs before using the strap.

Do not look through the Viewfinder at the sun or other strong light source.

Do not dissemble the camera, lens or any accessory.
Loading the Battery
With your fingernail, slide the Battery Chamber Cover on the bottom
of the camera body, as indicated by the arrows in the illustration,
and then open the Battery Chamber Cover.
The camera uses a 6v alkaline, silver oxide or lithium battery.
It is recommended that you wipe the battery’s contacts with a clean,
dry cloth before installing the battery.
Be sure to observe the polarity of the battery when you install it in
the camera body.
Insert the – (negative) terminal of the battery at a steep angle into the
Battery Chamber, as shown in the illustration, and then push the battery
down in the Chamber.
Make sure that the Lift Ribbon wraps around the battery and does not
cover the electrical terminals.
Close the Battery Chamber Cover by pushing it down firmly.