mamibot iGLASSBOT W120, Руководство пользователя

Страница: 8 / 12

8
3. Installation
3.4 Connect to Power Supply
Plug in W120-T.
Important Notes:
Be sure your W120-T is always connected to AC power supply while working. Don’t
use it if the backup battery is lack of power, use it after full charging. Take off your
W120-T asap, if the power supply is cut or unplugged accidently.
4. Operate W120-T
4.1 On/Off Button
A. Power On/Off button - Press for 2 seconds to turn on/off your W120-T.
B. Press the On/Off button once to start or stop the W120-T when it is placed on
window.
4.2 Start Your W120-T
A. Press the On/Off button for 2 secondes to turn on your W120.
B. Place your W120-T on glass, press again the On/Off button to start.
C. You can also start it from your remote control “START” button.
Caution: Before starting, make sure the edge of W120-T is 8 cm or more away
from window frames or corners.
4.3 Stop/Pause
A. When W120-T is cleaning, press On/Off button on the device or the Stop button on
remote control to stop it.
B. When W120-T is cleaning, press Pause button on remote control to pause/restart it.
C. You can also start it from your remote control Start button.
4.4 Use of Remote Control
Z Automatically “Z”
Type Cleaning
Manual Move UP
N Automatically “N”
Type Cleaning
Manual Move Down
Z|N
From “Z” to “N” Cleaning Manual Move Right
A No Use Yet Manual Move Left
B No Use Yet
Start Cleaning
Choose “Z” or “N” type automatically
STOP
Stop Cleaning Stop / Restart
8
8