Mami Robot Sevian K7, Руководство пользователя

Страница: 22 / 42

ENGLISH
Bef
or
e U
sing
Pr
epar
ing
Cleaning
Guidanc
e
Zaaloo
Pr
oduc
t I
nf
or
ma
tion
22
Composition and Name of Display Panel
Status Display Low Noise Mode Indicator Charging Indicator
Cleaning Time Indicator Scheduled Cleaning Time Indicator Auto-Recharge Button
Main Power Button Cleaning Time Control Button Photosensor
Operating MamiRobot
1. Press the Main Power Button on the main body. MamiRobot is turned on and becomes standby status.
2. In stand-by status, MamiRobot start cleaning with pressing the Main Power Button or Start/Stop Button on the remote control.
Default cleaning time is 1 hour.
3. For changing the cleaning time, press Cleaning Time Control Button on the main body or on the remote control. Each time
the Cleaning Time Control Button is pressed, working time is selected as 'Continuous', '60 min', '30 min' as shown in Figure.
After selecting with preferred cleaning time, start cleaning by following the step 2.
4. When you press Auto-Recharge Button on main body or on the remote control, MamiRobot stops it's work and returns to the
charging station to recharge its battery.
5. When the residual battery quantity runs out, [doc] is shown in status display with beep. The machine goes for recharging
to the charging station automatically.
6. MamiRobot will be turned off automatically by pressing the Main Power Button 2 seconds.
7. When no key is pressed in 2 minutes in stand-by status, MamiRobot is automatically turned off. ( If MamiRobot is docked
with charging station, stand-by status will be held.)
8. If you will not use the machine for a long time, remove the battery from machine.
Default time set Continuous 30 min Repeat same pattern
● ●● ●●●
or
LOW NOISE CLEANING
CHARGING SCHEDULE