Mami Robot PPORO, Руководство пользователя

Страница: 12 / 32

1. Press dust bin cover release and pull to remove bin. You can
empty and clean dust bin easily.
2. For restraining the propagating of germs, clean dust bin with
a pH-neutral detergent and rinse it with water.
3. After drying dust bin at good ventilation, install it in main
body.
4. Remove dirty dust filter through separating upper filter com-
partment and under filter compartment as shown in picture.
Replace new dust filter as shown in picture.
5. Combine filter compartment with dust bin, and install it in
main body with closing dust bin cover until it “clicks” into
place.
※
Do not attempt to run Mamirobot without dust filter.
Using without dust filter or using defective dust filter
causes failure due to dust inside the machine.
※
Dust bin and dust filter is factory assembled.
※
Dust filter should be replaced after 2 ~ 3 times used.
It depends on the amount of hair and dirt in your
cleaning. We recommend filter replacing after every
cleaning.
Empty Dust Bin and Replace Dust Filter
The longer pin(+) must be facing to
downward.
Place filter in place on the mark(+)
Place the cover in place
12
Before using
Preparing
Cleaning
Guidance
Zaaloo
Product Infor
mation