Mamas & Papas Vito TT, Инструкции по безопасному использованию

Страница: 21 / 24

21
inside the panel and fasten it as shown.
12• To fasten the car seat’s ISOFIX connectors to the vehicle
seat’s ISOFIX anchors, press sideways on both sides of
the body until they click into position, as shown in the
figure.
IMPORTANT: Ensure the car seat is securely
fastened by checking that the indicators to the sides of
the car seat's Isofix connectors become green on both
sides, as shown in the figure.
13• For the car seat to adhere completely to the vehicle
seat, pull the base's front strap towards you and at the
same time push the car seat against the vehicle seat, as
shown in the figure (arrow B).
IMPORTANT:
When finished, move the car seat to
ensure the Isofix connectors are securely fastened.
14• To unfasten the car seat’s ISOFIX connectors from
the vehicle seat’s ISOFIX anchors, press the button
sideways on both sides (Arrow A). The car seat’s ISOFIX
connectors will unfasten automatically.
Slip the ISOFIX connectors back into place by pulling
the base's front belt towards you (Arrow B).
TOP TETHER HOOK
IMPORTANT: There are three main variations
to the Top Tether hook.
15• Type A:
- Lift the headrest and slip the straps underneath.
- Fasten the TT hook of the straps to the clearly visible
vehicle hook, as shown in the figure.
Tighten the belt and check belt tension is correct using
the mechanism highlighted in green.
IMPORTANT: To fit the belts correctly, tighten
them firmly.
16• Type B:
- Lift the headrest and slip the straps underneath.
- Fasten the TT hook to the vehicle anchor, placed on the
rear of the vehicle's backrest, as shown in the figure.
Tighten the belt and check belt tension is correct using
the mechanism highlighted in green.
IMPORTANT: To fit the belts correctly, tighten
them firmly.
17• Type C:
- Lift the headrest and slip the straps underneath.
- Fasten the TT hook of the straps to the vehicle hook,
placed in the boot. This is generally marked by the Top
Tether symbol, as shown in the figure. Lift the cover
and fasten.
IMPORTANT: To fit the belts correctly, tighten
them firmly.
For any other fastening system, consult your
vehicle's instruction booklet.
How to secure your child in the Vito TT
car seat
18• Before placing the child in the car seat, release the
harness by pushing the red button on the crotch strap
buckle.
19• Lift the harness and attach the buckles to the elastic
bands on the sides.
20• Place the child in the car seat and arrange the harness
over the child’s shoulders and waist, as shown in the
picture.
21• Lock the harness by overlapping the tougues and
inserting them into the buckle of the crotch strap until
they click into place.
22• The child is now sitting correctly with the harness
fastened properly.
23• Finally, tighten the shoulder straps until they are snug
to the child’s body by pulling the central adjustment
strap towards you as shown in the figure, taking care
not to over-tighten the straps.
IMPORTANT: leave minimal slack (the space of a
finger) between the strap and the child’s chest.
24• To slacken the straps, press the button at the centre
of the car seat and at the same time pull the straps
towards you.
IMPORTANT: Hold the straps under the shoulder
pads and pull, as shown in the picture.
• The car seat has a booster cushion which is only
suitable for small babies and for when the harness is
at the first level. When the child is older, remove the
booster cushion.
25• To remove the booster cushion, slide it out of the side