– 4 –
To fit the tray, stand
behind the highchair and
push the two clips under
the sides of the tray
upwards and hold.
Slot the ends of the
highchair arms into the
recesses in the rear of
the tray.
Slide the tray along into
one of its four positions
and release the clips
under the tray.
Push the tray forwards
or backwards until it
locks into position.
To remove the tray,
release the two clips on
the underside of the tray
and side of the arms.
FITTING THE TRAY
Slip the pocket on the
back of the PVC cover
over the back of the
seat. Push the cover
down until the seat pad
of the cover rests on
the base of the seat
unit.
FITTING THE PVC COVER
– 5 –
Operating the harness
A
:
Locking the harness:
Push the tongues on the
end of the waist straps
into the crotch strap
buckle (
1
). The harness
will automatically lock
when the tongues have
been fully pushed in.
B
:
Adjusting the
harness:
To adjust the length of
the harness, slide the
buckles on the waist
band and shoulder
straps forwards or
backwards until the
desired length is
reached.
C: Unlocking the
harness:
Squeeze the ends of the
tongues together (
2
)
and then slide them out
of the buckle (
3
) on the
crotch strap. Your child
can now be removed
from the highchair.
OPERATING THE HARNESS
A
C
B
