How to use
1. Preparation
1. Let the end of the hose insert into the air intake socket until it clicking position.
2. After using, press the button and drag the end of the hose out.
3. Fit the tube to the handle and tube to floor brush as showing in the picture.
4. Additional 24cm metal tube can help you extend the length of metal tube. Fit this
additional tube to the metal tube.
2. Using the machine
Pull the power cable to suitable length. Insert the plug into power socket First make the
speed adjust button to MIN, and then press the switch to run the machine. The vacuum
cleaner begins to work. The part, which can adjust wind volume, is on the handle. The
speed controller can adjust the power. (Attention: Do not extend the cable beyond the RED
mark)
2. Using the accessories
(1) Bristles extended for hard for floors.
(2) Bristles retracted for carpets.
13/27
