MALTEC SafeSensor2000, Инструкция по эксплуатации

Страница: 7 / 15

The product is a smart carbon monoxide and smoke combo detector, adopts
microprocessor control, the electrochemical carbon monoxide sensor is stable and reliable
with low current consumption and small sensitivity drift. Mainly well use in the place of
carbon monoxide gas leakage and fire place, well guarantee personal safety.

High accurate electrochemical sensor and infrared photoelectric sensor

LCD display concentration PPM

3*1.5V AA battery supply

Ultra-long standby time, low current consumption

Low-battery warning

Alarm memory function

Alarming pause (Hush Mode)

Sound & Flash Alarm & LED indicating Alarming

SMT manufacture technology, reliable stability
Instructions
1. First Start
Insert 3 pieces 1.5V AA battery to the detector, the buzzer will make a sound “di”, the
detector starting preheating, It will display 2 minutes counting when the detector is in
starting-up.
2. Button
Press “TEST” button, LCD displays “CO 0ppm”, and then smoke “0.00db/m”, LED
flickering and the detector will sound continuos alarm.
3. Peak Record
Press “TEST” button, check alarm concentration, long press “TEST” button form more than
10 seconds again for clean up.
4. Indication Light
Under the normal standby situation, the green light flashes one time at every 35 seconds.
5. Low Battery Warning
When the battery capacity is low, the red light flashes one time at every 10 seconds, and
the LCD display “Lb”.
6. Alarm
CO—UL2034:
30PPM, within 120 minutes
50PPM, within 60 to 90 minutes
100PPM, within 10 to 40 minutes
300PPM, within 3 minutes
the buzzer will make sound “di” four times at every 5 seconds, the red light flashes, and
continue alarm. Please immediately turn off the valve, open the windows and doors, then
call your emergency service.
Smoke:
If there is a fire, when the unit detect the smoke concentration over than 0.1%db/m, it will
alarming, the blue light flash rapidly and the buzzer continue alarm.
7/15