If electrolyte gets into your eyes, rinse them out with clear water and seek
medical attention right away. It may result in loss of your eyesight.
Do not short the battery cartridge:
◦
Do not touch the terminals with any conductive material.
◦
Avoid storing battery cartridge in a container with other metal objects
such as nails, coins, etc.
◦
Do not expose battery cartridge to water or rain.
A battery short can cause a large current flow, overheating, possible burns
and even a breakdown.
Do not store the tool and battery cartridge in locations where the temperature
may reach or exceed 50 °C (122 °F).
Do not incinerate the battery cartridge even if it is severely damaged or is
completely worn out. The battery cartridge can explode in a fire.
Be careful not to drop or strike battery.
Do not use a damaged battery.
The contained lithium-ion batteries are subject to the Dangerous Goods
Legislation requirements.
For commercial transports e.g. by third parties,
forwarding agents, special requirement on packaging and labelling must be
observed. For preparation of the item being shipped, consulting an expert for
hazardous material is required. Please also observe possibly more detailed national
regulations. Tape or mask off open contacts and pack up the battery in such a
manner that it cannot move around in the packaging.
Follow your local regulations relating to disposal of battery.
Use the batteries only with the products specified by producer
. Installing the
batteries to non-compliant products may result in a fire, excessive heat, explosion,
or leak of electrolyte.
SAVE THESE INSTRUCTIONS
CAUTION: Only use genuine producer batteries. Use of non-genuine producer
batteries, or batteries that have been altered, may result in the battery bursting
causing fires, personal injury and damage. It will also void the producer warranty for
the producer tool and charger.
Tips for maintaining maximum battery life
Charge the battery cartridge before completely discharged. Always stop tool
operation and charge the battery cartridge when you notice less tool power.
Never recharge a fully charged battery cartridge. Overcharging shortens the
battery service life.
Charge the battery cartridge with room temperature at 10 °C - 40 °C (50 °F -
104 °F). Let a hot battery cartridge cool down before charging it.
Charge the battery cartridge if you do not use it for a long period (more than
six months).
25/ 52