Malta Dynamics A6317 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 16

Malta Dynamics A6317 Скачать руководство пользователя страница 5

MaltaDynamics.com | 800-494-1840

Visit www.MaltaDynamics.com for the latest user

instruction manual based upon date of manufacture.

MaltaDynamics.com | 800-494-1840

Visit www.MaltaDynamics.com for the latest user

instruction manual based upon date of manufacture.

5

Universal Standing Seam Roof Anchor

Instruction Manual

A6317 INSTALLATION INSTRUCTIONS

Tools Needed for Installation:

• Torque wrench
• 5mm Hex/Allen bit
• 8mm Hex/Allen bit

Tools Needed for Installation:

Certain types of seams will stretch as the set screws are torqued. Set screws
must be torque-checked with a torque wrench prior to each connection to ensure
the seam has not stretched and lowered the torque setting. A torque wrench that
reads in ft/lbs, a 8mm, and a 5mm hex bit are required to properly install the
anchor. It is imperative that the set screws be torqued to the correct level, not
under-torqued and not over-torqued. Under-torquing will reduce the attachment
strength of the A6317, and over-torquing can damage the seams. Failure to
choose the correct set screws and torque setting could result in serious injury or
death. The A6317 must be positioned a minimum of 6’ from any fall hazard or
roof edge. A minimum of 144 square feet of roof area is required for attachment.

Steps to installation:

1.

Loosen all 8 set screws wide enough to allow the anchor body to set down over

the seam.

2. Position the tips of the 4 set screws on one side of the anchor in a straight row

about halfway across from the clamp opening.

3. Use a screw gun or ratchet with a hex bit to tighten set screws on the opposite

side of the anchor making sure the anchor stays centered.

DO NOT USE AN

IMPACT GUN!

4. Be sure the screw gun clutch is set to avoid over tightening the set screws. Final

torquing should always be done with a torque wrench. All 8 screws should be
torqued to 50 ft/lbs. REMINDER: Check twice prior to use to ensure seam has
not stretched.

5. The A6317 is not ready to use.

Do not use Impact Gun to tighten set screws!

WARNING

«
...
3
4
5
6
7
...
»

Содержание A6317

















Отзывы:

Нет отзывов