MALONE
R
18”
F
oam
B
lock
K
ayak
K
it
18”
F
oam
B
lock
K
ayak
K
it
MALONE
R
Installation & Loading Instructions - Please Read Before Beginning
1
3
Deluxe Kayak Kit
Deluxe Kayak Kit
SOFT RACK KAYAK CARRIER
. Place the kayak onto the Blocks so that it
is aligned and the weight of the kayak is
evenly distributed on each Block.
See image 2.
Step 1: Attaching Blocks to Kayak
. Unroll the 9’ Block Straps. Thread each one
through the cut-out in the bottom of each
Block. For installation without cross bars,
the Blocks should be placed so that they are
spaced apart 1/3 of the total length of the
kayak. For installation with cross bars, the
Blocks should be spaced apart the same
distance as the distance between the front
and rear cross bars. See image 1.
. Tighten the two Block Straps so that kayak
and Blocks are firmly cinched together.
See image 3.
12’ Bow & Stern Lines
15’ Load Straps
9’ Block Straps
2
Kayak Blocks
MPG152
MPG186
For Vehicles without Cross Rails:
1. Unroll the 9’ Block Straps. Thread each one through the
cut-out in the bottom of each Block. The Blocks should be
placed so that they are spaced apart 1/3 of the total length of
the kayak. Maintain a minimum of 24” between the Blocks.
See image 1.
2. Place the kayak onto the Blocks so that it
is aligned and the weight of the kayak is evenly distributed on
each Block. Tighten the two Block Straps so that kayak and
Blocks are firmly cinched together. See image 2.
3. Confirm that the bottom of the Blocks and the roof of the ve
-
hicle are clean and free of any dust or dirt that could scratch the
finish. Place the kayak with Blocks onto the vehicle. Center the
kayak on the roof and confirm that the weight is evenly
distributed. See image 3.
Note: Do not place Blocks on sun roof.
2
MALONE
R
Installation & Loading Instructions - Please Read Before Beginning
1
3
Deluxe Kayak Kit
Deluxe Kayak Kit
SOFT RACK KAYAK CARRIER
. Place the kayak onto the Blocks so that it
is aligned and the weight of the kayak is
evenly distributed on each Block.
See image 2.
Step 1: Attaching Blocks to Kayak
. Unroll the 9’ Block Straps. Thread each one
through the cut-out in the bottom of each
Block. For installation without cross bars,
the Blocks should be placed so that they are
spaced apart 1/3 of the total length of the
kayak. For installation with cross bars, the
Blocks should be spaced apart the same
distance as the distance between the front
and rear cross bars. See image 1.
. Tighten the two Block Straps so that kayak
and Blocks are firmly cinched together.
See image 3.
12’ Bow & Stern Lines
15’ Load Straps
9’ Block Straps
2
Kayak Blocks
MPG152
1
3
