Malone Mega Sound, Инструкция по эксплуатации, Страница: 21 / 23

21
USB reader
DVD-USB interface
This DVD unit has two USB jacks.
Press the INPUT key to select Disc, then you can insert a USB and press the USB key to play Mp3 music, MPG4 or
JPEG files in DVD-USB (operation is similar to Mp3 disc).
Important: The USB port is intended for data transfer only, other devices cannot be used with this USB connection.
The use of USB extension cords is not recommended.
REC-USB function
The button of RECORD, PAUSE, PLAYBACK are all for recording use only. REC_USB is recording jack. Recording
function only works in the modes of AUX, LINE, DISC, BT, FM.
1. Recording button: Please insert your USB device and press record button,it will show WAITING for few seconds
and then RECORDING for a moment before starting button.
2. RECORD button: Press this button when in record mode, it will show WAITING an display for a
3. seconds. Then start to play the files recorded.
4. PAUSE button: Press PAUSE button to pause recording, press this button again to continue recording.
5. STOP button: Press to stop recording.
Amplifier
Normal Function
1.
Be sure to switch off the power and to connect the outputs to corresponding input jacks.
2. Turn on the power and wait 3-4 seconds until the speaker functions are connected.
3. Select an audio source by pressing the INPUT key on the front panel or on the remote control
4. To display AUX, LINE IN, DISC/USB, BT, TUNER, RECU.
5. Adjust the VOLUME knob on the front panel or the VOL+/- key on the remote control to adjust the setting of
the main volume.
6. Press the MENU key on the front panel or on the remote control to display TREBLE, BASS, XDRIVE, SPEAKER
LIGHT and MIC VOLUME/ECHO then adjust the MULTI knob or / to change music treble, bass, speaker
light and MIC effect.
7. Press the MUTE key to mute, press it again to reset.
Tuner applications
1. Before using the radio functions, you must attach the supplied antenna. Adjust the antenna to obtain optimum
reception.
2. Press the INPUT key on the front panel (amplifier) or on the remote control to select „FM„ function.
3. Press the CH+/CH- key on the remote control to find radiobands that you have previously saved.
4. Press or hold the TU+/TU- key on the remote control to adjust the radio frequency manually.
5. Press the AUTO key on the remote control, the machine will scan radio channels from low-frequency to high-
frequency by itself and memorize the channels one by one.
6. Press the MEMO key on the remote control and it will memorize the current radio frequency on the band. Press
the number buttons to set desired programed number. The machine can memorize at most 40 FM radio bands.
7. In FM mode, press the ST.MO key and the remote control to select STEREO or MONO.
Karaoke function
1. The machine can auto detect whether MIC1, MIC2 or MIC3 is inserted.
2. Please turn off the microphone volume and adjust the volume gradually after inserting the microphone.
3. Press MENU on the remote control to display MVOL, then press +/- ,to change the microphone VOLUME.
4. Press MENU on the remote control to display ECHO, then press+/-, to change the microphone ECHO.
5. For MIC3, you can use the MIC3 volume knob to adjust its volume.
6. You can use the delay, treble & bass knob on the rear panel to adjust all MIC effects.