MALONE
R
8818
MPG112
12’ Safety Tie-Downs (2)
50mm + 60mm Mounting Bolts (16)
Gunwale Brackets (4)
Jawz Universal Adapters (8)
TM
MALONE
R
Installation & Loading Instructions - Please Read Before Beginning
Veuillez lire les instructions avant d’entreprendre l’installation et le chargement
2
1
3
. Place the carrier onto the front cross bar with the
forward section (with foam pads) facing inward.
See image 2.
. Insert a mounting bolt (50 mm or 60 mm) into the right side
hex hole. Install a Jawz mounting adapter and washer.
Loosely apply a T-knob.
See image 1.
.
Insert the second mounting bolt (50 mm or 60 mm) into the
left side carrier hex hole. Fit the Jawz mounting adapter
and apply the washer. Loosely apply a T-knob.
See image 3.
15’ Load Straps
(2)
GUNWALE STYLE CANOE CARRIER
B F
O
IG O T
MALONE
R
DownLoader
DownLoader
TM
J-STYLE FOLDING KAYAK CARRIER
12’ Safety Lines
Jawz Universal Adapters
Mounting Bolts
Kayak Carriers
Load Straps
T-Knobs
60mm
70mm
Installation & Loading Instructions - Please Read Before Beginning
1
3
2
. Insert Mounting Bolt through one hole of a Jawz adapter.
Insert washer and loosely apply a T-knob. See image 2.
. Faites passer le boulon de fixation dans l’un des trous
d’un adaptateur Jawz puis vissez légèrement un bouton
en ‘‘T’’ à la base du boulon. (Figure 2)
. Prior to installation, insert a bolt into the mounting holes in
the bottom of the carriers. Push upward to open the two
mounting hole covers located in the Base pads.
. Insert a Mounting Bolt into one mounting hole from the top
side. Rotate and close the mounting hole cover.
See image 1.
. Insérez un boulon de fixation dans l’un des trous hexagonaux
situés sur le côté supérieur du support.
(Figure 1)
. Place the carrier onto the front cross bar with the boarding
ramp facing out. Swing the Jawz under the cross bar as
shown. See image 3.
. Placez le support sur la barre transversale avant, la rampe
de chargement vers l’extérieur. Faites passer l’adaptateur
Jawz sous la barre transversale, tel qu’indiqué. (Figure 3)
1
Mounting Bolt Washers
Base Pad
Covers
IMPORTANT WARNING:
All vehicular transports are potentially hazardous. Any person(s) using Malone products are personally responsible for
following the given directions for use and/or installation and accepts full responsibility for any and all damages or injury of any kind including death,
which may result from their use and/or installation.
It is critical that all Malone racks and accessories be properly and securely attached to your vehicle. Improper attachment could result in a serious
accident, and could cause serious bodily injury or death to you or to others. You are responsible for securing the racks and accessories to your car,
checking the attachment’s prior to use, and periodically inspecting the products for adjustment, wear, and damage.
You must read and understand all of the instructions and cautions supplied with your Malone products(s) prior to installation or use. If you do not
understand all of the instructions and cautions, or, if you have no mechanical experience and are not thoroughly familiar with the installation
procedures, you should have the product installed by a professional installer.
