Art. No. 1511026
www.malmsten.com
Malmsten AB • www.malmsten.com
+46 44 28 71 00 • [email protected]
II - Assembly
2.1
Assembling the front frame
Assemble the crossbar using:
1.
Crossbar left (1) – 1 pcs
2.
Crossbar right (2) – 1 pcs
3.
Aluminum connector (10) – 1 pcs
4.
Connector 90x15x6 (15) – 1 pcs
5.
Hex socket button cap screw (18) – 8 pcs
6.
Enlarged washer (32) – 2 pcs
7.
Hex socket cap screw M8x12 (23) – 2 pcs
Do not tighten all the screws yet. This
must be done after all the assembly
process is complete.
2.2
Assemble the crossbar with posts using:
1.
Pre-assembled crossbar – 1 pcs
2.
Post (5) – 2 pcs
3.
Aluminum connector (10) – 2 pcs
4.
Hex socket button cap screw (18) – 16 pcs
2.3
Assembling the bottom (net support) frame
Assemble the rear bottom frame using:
1. Bottom frame left (3) – 1 pcs
2. Bottom frame right (4) – 1 pcs
3. Aluminum connector (10) – 1 pcs
4. Connector 90x15x6 (15) – 1 pcs
5. Hex socket button cap screw (18) – 8 pcs
6. Enlarged washer (32) – 2 pcs
7. Hex socket cap screw M8x12 (23) – 2 pcs
Loctite can be used to permanently lock the bolts in its position.
