Art. No. 1511025
www.malmsten.com
Malmsten Inc • www.malmsten.com/en-US
[email protected]
31. DIN 125
A8,4
washer
8
32. DIN 9021
A8,4
enlarged
washer
4
33. Floats
2
34. Plastic plug 2
35. Eyelet
screw
4
36. Black
plastic
washer
4
37. Net hook
”Omega”
50
38. Hex key #5
1
39. Hex key #6 1
40. Flat
spanner
13 mm
1
41. Rubber
net strap
1
42. Net
1
I - Preparations
1.1
Prepare the tools and put on your necessary safety clothing
1.2
Cover the floor with blankets / soft lining / protection tiles in order to prevent eventual product
or floor damages
1.3
Unpack the product and lay it down safely on the prepared floor
1.4
Check carefully if any of the delivered items are damaged or missing (a list of components can be
found above)
Please Note
: Once the goal is assembled correctly, and upon your next goal inspection (recommended approx.
once a week) you should go over and retighten all bolts.
Certain bolts can benefit from retightening and sometimes the additional application of a product like Loctite.
Loctite, is like a glue, and will lock permanently the bolts in its position.
Loctite can be purchased in most hardware stores.
Important when using Loctite: We ask you to please observe that Loctite should only be used on the bolts high-
lighted in
yellow
in this document, and Loctite should never be applied to the bolts highlighted in red.
