9
10
11
DEclaRaTioN of coNfoRMiTY
We hereby certify that the device
satisfies the provisions for CE markings
in accordance with the EU directives
(EMC Directive 2014/53/EU, RE Directive
2014/53/EU, RoHS Directive 2011/65/
EU, (EU) 2015/863, REACH (EC) No
1907/2006) as described in this manual.
For and on behalf of:
Malmbergs Elektriska AB, Sweden.
Mr. Anders Folke / Product Manager
Date: December 3, 2019
on/off device 5 times until the indicator
light is flashing rapidly or a beep on the
module is sounding continuously.
Q6: other technical problems?
Please contact our technical support by
e-mail: [email protected].
SYSTEM REQuiREMENTS
•
WIFI Router
•
9919043 ZigBee gateway
•
iPhone, iPad (iOS 7.0 or higher)
•
Android 4.0 or higher
faQ
Q1: What should i do if i can’t configure
the device?
a. Please check whether the device is
powered on.
b. Make sure your mobile and the device
are in the same 2.4GHz WIFI network.
c. Please check if the WIFI signal is strong
enough.
d. Make sure the password entered in the
App is correct.
e. Make sure the wiring is correct.
Q2: Which products can i control with the
device?
You can control all types of lights, and
electrical products in accordance with the
device specifications.
Q3: What happens if the Wifi goes off?
You can still control your unit with Blue-
tooth or with the ON/OFF switch that is
connected to the unit.
Q4: What should i do if i change the Wifi
network or change the password?
You can connect the module to the WIFI
network according to the App User Manual.
Q5: how do i reset the device?
Press and hold the reset button or power
Note: contents, icons and symbols
shown in the mobile app may be subject
to change without prior notice due to con-
tinuous upgrading and improvement.
7
6
8
app uSER MaNual
Scan the QR code to download the
MALMBERGS App. You can also search
the keyword “MALMBERGS”at App
Store or Google Play to download
the App.
Register your account with your mobile
number or e-mail address, wait a
few minutes for verification code (by
text message or e-mail) and enter it
where required to set a password, and
“Create Family”. If you already have
an account, please log in directly with
your mobile number or e-mail address
and password to open the App.
2
1
iOS APP/Android APP
Make sure the ZigBee gateway is
added and installed to the WIFI
network. Ensure that the product is
within the range of the ZigBee gateway
network.
3
9919043
Open the control panel of the ZigBee
gateway on the App.
4
Click “+” (Add sub-device) to select
the suitable product category and
follow the on-screen instruction
for pairing.
When pairing is done, the device will
be shown in the App.
5
piR Sensor
Lens
Base
Reset button
Network/ pairing
indicator
