Malmbergs Neso LED, Инструкция по эксплуатации

Страница: 13 / 19

12 13
With sufficient natural light,
the light does not switch on
when presence is detected.
See point 3 above.
With insufficient natural light,
the light switches automati-
cally when a person enters the
room.
After the people has left, the
light dims to 10% or 30%
(selectable) stand-by level after
the hold time.
The light switches off auto-
matically after the stand-by
period has elapsed.
1. Three levels of light: 100%, orientation light (10%, 30%) and OFF.
2. Two periods of selectable waiting time: motion hold time after the person has left
the detection area and standby period with orientation light.
3. Lux setting (controls if the light should come on in daylight, twilight or darkness).
Except when the standby period for orientation light is set to always orientation
light, then the light sensor is inactive.
4. Selectable detection area.
5. Deactivation of the sensor (8h). Rapidly turn off/on the power supply 3 times
within 3 seconds, the LED light will be on for 8 hours straight.
FEATURES