6
stand-by button
speed button
timer/temperature up button
timer button
Mode button
timer/temperature down button
sleep button
low/high fan speed
Automatic, cool, dehumidify and fan mode
temperature display
Control panel operation
Automatic, cool, dehumidify and fan mode operation.
1. turn on the unit
a) Plug in then the unit beeps once.
b) Press the “ ” button. the unit starts in Automatic mode and the temperature
display will show the current room temperature.
2. select operating mode
Press the "
" button to select a desired mode shown below:
ContRol PAnel
3. Adjust temperature
the temperature can be set within a range of 15°C to 31°C by 1°C.
Press
or
button to increase or decrease the temperature with 1°C for
each press. the led display shows the target temperature for 5 seconds and then
the room temperature.
4. Adjust fan speed
Press the "
" button to select a desired fan speed shown below:
5. stand-by
Press the " " button again to set the unit to stand-by mode. A buzzer sounds to
confirm that the unit is turned off.
