Malloca MI 593B, Инструкция по эксплуатации

Страница: 9 / 20

9
level indicator for the cooking zone that needs to automatically reduce power will display “r” for 3
seconds, following which the power level will decrease to the previous setting.
The boosting time is limited to 10 min to protect cooking utensils. After the booster is switched off
automatically, the cooking zone continues operation on power level “9”. The booster can be reactivated
after some minutes.
In case that the pan is removed from the cooking zone during boosting, the boosting function remains
active and boosting time continues.
Residual heat indicator
It is meant to indicate to the user that the glass ceramic has a dangerous touch temperature in the
circumference of a cooking zone. The temperature will be determined following a mathematical model
and the remaining residual heat will be indicated by means of “H” on the corresponding display.
Heating-up and cooling down will be calculated dependent on:
-
The selected setting („0“ to „9“)
-
The ON/OFF time.
After switching-OFF the cooking zone the respective display shows “H” until the assigned cooking
zone temperature is mathematically in a uncritical level. (<60°C).
Automatic power OFF function (operating time limitation)
Dependent on the selected setting, every cooking zone will be switched-OFF after a defined
maximum operation time if no operation of the assigned cooking zone follows within this time period.
Every change of the cooking zone condition (by means of the PLUS-, MINUS- key) puts back the
maximum operation time of this cooking zone to the initial value of the operating time limitation.
Protection against unintended switching-ON
If the electronic control realizes a continuous operation of keys for approx. 10 seconds, it switches
OFF automatically.
If no cooking zone is activated within 10 seconds of switching on the touch control, this will revert to
stand-by status.
When the control is switched- ON the ON/OFF key has priority over all other keys, so that the
control can be switched-OFF anytime, even in case of multiple or continuous operation of keys.
In the stand-by mode a continous operation will not be signalized. However, before the electronic control
can be switched ON again, it has to recognize that all keys are not operated.
Key lock (child safety feature)
Child safety feature:
Key lock:
To activate the child safety lock after switching on the touch control, press the safety lock button (10)
for 1 second and the safety lock indicator LED will illuminate (11).
The safety lock function may be activated either when cooking zones are active or when the appliance is
fully switched off.
The electronic control remains in a locked condition until it gets unlocked, even if the control has
been switched-OFF and -ON in the meantime. Also a reset of the control (after a voltage drop) does not
cancel the key lock.
Unlocking for cooking purposes:
To unlock the touch control, press the safety lock button (10) for 1 second and the safety lock
indicator LED will be extinguished (11).
Audible signal (buzzer)
While the control is in operation the following activities will be signaled by means of a buzzer:
-
Normal key activation with a short sound signal.
-
3 short acoustic signals (beeps) for turning off the touch control.