Malloca MH-03IR, Инструкции по эксплуатации и монтажу

Страница: 11 / 91

11
Do not use a steam cleaner to clean this hob. Steam could penetrate electrical
components and cause a short circuit. Pressurized steam could cause permanent
damage to the surface and to components for which Malloca cannot accept
responsibility.
Do not use any sharp pointed objects which could damage the seal between the
ceramic surface, the surrounding frame and the countertop.
Never use abrasive or caustic (oven) cleaners, dishwasher detergent, scouring
pads, steel wool or hard brushes. They will damage the surface.
The ceramic surface can be cleaned using a cleaner for ceramic surfaces. Follow
the manufacturer’s instructions.
Make sure that no cleaner residue remains on the ceramic surface by carefully
wiping the hob with a damp cloth. They may damage the hob or produce toxic
fumes when heated.
Be sure that pot and pan bases are clean and dry.
After cleaning, dry the ceramic surface with a soft cloth to prevent a build up of
limescale deposits.
Clean the hob regularly, preferably after each use. Allow the hob to cool before
cleaning.
Wipe off any soiling using a damp cloth. Stubborn soiling is best removed with a
shielded scraper blade.
Apply a ceramic cleaner using a soft cloth or paper towel. To remove any lime-
scale deposits or metallic residue apply a ceramic cleaner using a soft cloth and
a shielded scraper blade if necessary.
After cleaning wipe the ceramic surface with a damp cloth and dry. A cleaner with
a
special additive to prevent water marks and smears on the ceramic surface may
be used.
Any melted solids like sugar, plastic or aluminum foil should be removed as soon
as possible, while the heater is still warm. If they are allowed to harden the hob
may become pitted.
Cleaning and Care