14
7 ASSEMBLY OF PRODUCT
Drilling the Hanger Holes
Make holes with Ø4 mm diameter on the points
marked as A, B, C, D on the mounting scheme.
end of the
p�p
e to the flue hole on
the wall.F
�
gure 5
1
2
F�gure 4
The appliance should be mounted on the cab-
inet on the points A, B, C, D by using 4 x 40
screws provided with the appliance. The front
panel should not be rubbed against the cabinet
cover when the sliding set moves.
Figure 3
Figure 5
ATTENTION
C
Since twists and bends in the aluminium pipe
D
will lead to reduction in the air suction power,
A
B
avoid using twists and bends as much as pos-
C
sible.
D
A
Functions of
Device
B
Cooker hood is used in kitchens with or without
flue.
In case of use with flue;
In flue-connected use, cooker hood must be
Figure 3
Place the plastic flue provided with the appli-
ance on the flue outlet on the appliance. Rotate
the plastic flue clockwise. Figure 4
Install flexible aluminium pipe to
plastic flue outlet. Install the other
connected to a flue that will discharge the air.
Prefer the shortest way for the pipe system that
leads to flue, in order to get the maximum effi-
ciency from your cooker hood. Your product is
manufactured in a form appropriate for use with
flue.
