Malloca K-3410DR, Инструкция по эксплуатации

Страница: 15 / 24

15
In the event that any obstacle exists on the
way of the lift when closing, e.g. a pot, dishes,
hands, etc., the movement is stopped when
the cover plate hits the obstacle and the lift
then goes up again.
Motor on/off and changing the power
settings
Each time the button is touched, the
running stage increases by one step up to the
max. Level 3 is reached. The display
will shown in each case theselected running
stage.
Touching the button decreases the running
stage by one step each time; until the motor
is switched off.
Nothing will be shown on the display then.
By touching the button for about
3 seconds, the automatic delayed shutoff
function will be activated. The set running
stage starts lashing on the display.
15 minutes after the activation of the automa-
tic delayed shutoff function, the motor and/or
the light will be switched off automatically.
The lift will remain stopped then.
To change the running stage within the set
Automatic Delayed Shutoff Function time
of 15 min, touch the button or The
Automatic delayed shutoff function will remain
active.
The automatic delayed shutoff function can
be turned off at any time within the 15
minutes. To do this, the button must be
pressed for about 3 seconds.
3.2. Motor operation
3.3. Automatic delayed shutoff
function switching and changing
Safety function when clo-
sing the lift:
3 Operation