CONTENT
Demonstration of the hob……………………………………………………………
…..2
Technical data………………………………………………………………………
……2
Operation guide ………………………………………………………………………
…….3
Notice…………………………………………………………………………………………..4
…………………………………………………………………….5
………
……..……………………………
………
…6
Assembling guide………………………………………………………………………………6
……
……
…
……
…
Choice of the Utensils
………………
Trouble shooting
- 6 -
-1-
ASSEMBLING GUIDE:
Trouble shooting
:
No.
Item No.
Picture one
-
*
*
DZ 7 35 4
7 08 4 68 8 0
Picture two
-
*
*
DZ 58 03
5 55 473 80
Hole size
(length*width*depth/Rmm)
◆
This product is build-in vitro-ceramic hob. Please refer to the hole size
of this handbook before assembling(For more details, please refer to the table
below),The hob must be assembled by the professional persons.
The installment suggested afterwards separates with the board separates,
between them must maintain 5cm the gap, such user cannot contact the
product ledger wall directly, guards against scalds.
Dear Valued Customers:
We thank you for choosing MALLOCA Ceramic Hob series. Please be
reminded to read this handbook carefully before assembling or using the product.
This User's Handbook contains important information, including safety and
installation guidelines. Please keep this handbook for future reference.
Malfunction
Cause
Solution
Cable loosen
Connect the power supply plug
No
indication
light
when
power “ON”
Broken circuit of fuse
Call the after-sale service
The
hob
does
not
work
constantly
The hob is self protected when
the temperature overheat the
maximum
Normal
phenomenon.
Once
the temperature cool down, it
can work normally
It can be used as usual if with a
small crack
Continue to use
Insulating layer cracked or
broken
If have fragment or incomplete
Disconnect the unit from the
main power supply and stop
using it and call the after-sale
service.
The indicator is broken
Residual heat indicator does
not light-up while the ceramic
surface has high temperature
Inner connecting lead fall off
Call
the
after-sale
service
centre
Big concavity of the cooking
utensil
Heating time extending
Pan area is too large
Change new cooking utensil
