FIRST STEPS
FIRST:
1. POWER UP YOUR UNIT. It will take a few seconds for Manther to initialize and recall your memory settings.
LED screen will show the following info for settings:
• PRESET INDICATOR: A (BANK A) and 01 (preset number 1)
• BPM
• LFO SETTING (sync or not synced and rate)
• DELAY SETTING
• BAR GRAPH DISPLAY OF FADER/CONTROL POSITIONS
• OUTPUT WAVEFORM
PRESS THE START/STOP BUTTON.
You will now see a blue light moving across each step button indicating
playback.
MANTHER ships with some already programmed presets. To recall these presets, hold the RECALL button while
selecting one of the sequencer/step buttons. If you want to clear a preset, simply select SHIFT and then CLEAR.
You can save a now empty sequence by holding SAVE and one of the step buttons/preset slots.
THERE ARE TWO WAYS YOU CAN START RECORDING NOTES ON STEPS:
1. You can press the RECORD button and play the keyboard - every time you press a key, a note will record on a step.
2. You can program steps on or off on the sequencer and then hold those lit buttons/steps while selecting notes on
the keyboard.
• Once you have programmed some steps with notes, adjust the fader/control settings for the LFO, the VCO, the
SOURCE MIXER, the VCF, VCA and ENVELOPE.
• Save your preset: HOLD SAVE, then select one of the sequencer buttons 1-16 to save to a slot.
• To expand your sequence to 32 steps, hold the 2:4 button and then select the 16th step button. The sequence you
programmed into 1:4 will now automatically copy to 2:4.
• To record automation of fader changes, hold RECORD while moving faders. You will see the LED of the fader
with automation recording is now lit red. To clear pre-recorded fader/control automation, hold the CLEAR
button while moving automated fader or knob. You can automate all of the faders as well as GLIDE and DELAY
controls.
FIND THE FULL MANTHER MANUAL ON
MALEKKOHEAVYINDUSTRY.COM
