OSCILLATOR
MANTHER GROWL MANUAL V.1
PG. 5
INDIVIDUAL VCO WAVEFORM
DIRECT OUTPUTS:
Square, Saw, Tri-Shape output.
Patch to external mixers or
modulate other modules.
INDIVIDUAL VCO
CONTROLS:
Square, Saw, Tri-Shape manual
level controls. Becuase the level
controls are sent to the VCA
OUT, the manual controls do
nothing if you’re patching from
the individual outputs
VCO FINE TUNE CONTROL:
Control the tuning of the VCO by
small increments.
VCO 1V/OCT INPUT:
Insert 1V/oct (4-5 octave range
available) from an external CV
source like the Malekko Voltage
Block.
VCO OCTAVE RANGE SWITCH
Raise or lower the VCO octave.
VCO PULSE WIDTH
MODULATION CONTROL
Manual control over the
square wave’s pulse width.
VCO PULSE WIDTH
MODULATION CV INPUT
External control over the
square wave’s pulse width.
Accepts 0 to +5V.
ASSIGN WAVEFOLDING SHAPE TO TRI OR
ALL:
Switch wavefolding from Triangle only to ALL
(fold signal post-filter). The ALL position also
shapes the EXT IN sound.
WAVEFOLD SHAPE CONTROL
.
Manual shape control.
WAVEFOLD SHAPE CV INPUT:
CV input controls wavefolding amount. Accepts
0 to +5V.
WAVEFORM CV INPUTS:
Patch from external CV sources to control the
levels of the Square, Saw and Tri-Shape
waveforms. Accepts 0 to +5V.
