VCA ENVELOPE OUTPUT
VCA GATE INPUT:
Insert any gate over 1.6V to
start VCA envelope. If there is
no gate input on the Filter
Envelope, the VCA envelope
gate input will be normalled to
the Filter (both start at the
same time based on VCA
envelope gate input).
VCA ADSR CONTROL:
Controls for Attack, Decay,
Sustain and Release of VCA
Envelope.
VCA OUTPUT:
POST VCA AUDIO OUTPUT
VCA CV INPUT:
CV input controls VCA level.
VCA LEVEL CONTROL:
Manual control the level of the
main VCA output.
Patch from a 1V/oct source and
adust the VCO FINE control
accordingly.
Adjust the VCO OCTAVE
RANGE SWITCH per the
diagram.
Adjust the VCO SQUARE
WAVE, SAW, TRI-SHAPE,
WAVEFOLD SHAPE and
PULSEWIDTH controls per the
diagram.
Assign VCO WAVEFOLDING
SHAPE SWITCH to ALL.
Adjust LFO SPEED fully to the
right.
Adjust/assign the LFO
PULSEWIDTH control per the
diagram.
Patch a short gate into the VCA
FILTER EXTERNAL INPUT &
LEVEL CONTROL:
Audio input routes to filter and
knob controls incoming level.
FILTER CUTOFF CONTROL
FILTER RESONANCE
CONTROL
FILTER GATE INPUT:
Insert gate to start the Filter
Envelope.
FILTER ENVELOPE OUTPUT
FILTER RESONANCE CV
INPUT:
Modulate the resonance of the
filter.
FILTER FREQUENCY CV
INPUT:
Modulate the frequency of the
filter.
ADSR FILTER CONTROL:
Controls for Attack, Decay,
Sustain and Release of the Filter
Envelope.
FILTER ENVELOPE LEVEL
CONTROL:
Control the amount of envelope
sent to the filter cutoff.
FILTER ENVELOPE INVERT
SWITCH
Switch to invert the Filter
Envelope.
YOUR FIRST PATCH
VCA & FILTER
Adjust the VCA ENVELOPE
ATTACK, DECAY, SUSTAIN,
RELEASE and VCA LEVEL
controls per the diagram.
Set the FILTER ENVELOPE
INVERT SWITCH to the up
position.
Adjust FILTER ENVELOPE
LEVEL, ATTACK, DECAY,
SUSTAIN AND RELEASE
controls per the diagram.
Adjust FILTER EXT LEVEL,
CUTOFF and RESONANCE
controls per the diagram.
Patch out from the VCA OUT to
main mixer.
