Libretto Malber WD 800.FH9 Mon Mar 26 17:07:13 2001 Pagina 10
Colori compositi
SM695
8
A
B
C
E
P
M
D
SPIN SPEED ADJUSTMENT BUTTON
This function allows the spin speed to be altered by pressing the button
LOW SPEED
HIGH SPEED
1
0
STOP WITHOUT DRAINING BUTTON
To keep the water in the tub after washing, push this button. The machine will stop automatically,
so that garments subject to creasing can be dealt with. At a later time it will be necessary to
push again to allows the machine to complete its final drain and spin cycle
1
0
NO SPIN BUTTON
To avoid any kind of spin select this button
1/
1/2
2
1
0
HALF LOAD BUTTON
For small loads (less tha 3 Kg. of fabric) select this button
1
0
EXTRA RINSE BUTTON
The washing machine has been set up so that water consumption is reduced to a minimum;
three rinses are usually sufficient. If desired, it is possible to use an additional rinse cycle, by
selecting the button
A- PROGRAM TABLE
B- DETERGENT DISPENSER
M- ADJUSTABLE THERMOSTAT KNOB
D- DRYING TIME PROGRAMMER KNOB
E- PILOT LAMP
C- PUSH BUTTONS
P- PROGRAMMER KNOB
Selecting the program and start-up
Select the program you require by turning the knob until the indicator coincides with the number of the
program to be selected The machine will start-up when the button or the knob are in the position "1"or
"ON"
.
FUNCTION BUTTONS
