LIGHT STRUCTURE, CONTENT OF THE BOX
Content of the box:
Solarway 10 solar light (1 pc)
Light structure:
1.
Solar panel
2.
Thermal dissipation air duct
3.
ON/OFF button
4.
Shaft for adjusting the vertical angle of
the light head
5.
Tightening/mounting bolts
6.
Mounting bracket
7.
Motion (PIR) sensor
8.
LED panel
9.
DC 5521 5V port
ATTENTION! The life span of the battery depends on you as well! Please use
the light correctly as described in this manual by positioning it in a sunny place
where sufficient sunlight is provided for charging the battery every day. If you
intend to turn off your light, and you do not want to use it for a while, please
make sure that the battery has sufficient charge, and it is not totally discharged.
If you would like to store the light instead of using it, please turn off the light
with the ON/OFF button. In case of a longer storage, please turn on the light
once every month, put it in a sunny place in the morning, and turn it off at dusk.
In this case the light can be stored again for another month. It may decrease
the life span of the battery if the light is stored for a longer period with a totally
discharged battery, moreover it can damage the battery!
ATTENTION! Please full-charge the battery before first use. Place the light on
a sunny place with a well-adjusted optimal angle for the solar panel (the solar
panel should face towards the midday sun). In this case full-charge can be done
in 8-10 hours considering sufficient sunshine provided. You also can full-charge
the light by AC using a USB cable, or from a power bank, by using the DC 5521
5V interface.
ATTENTION! The light sensor switches off the light even at night if it receives
high luminosity lighting from above! Do not place your light in a position where
other light sources can hinder its operation (e.g. do not place the light below high
luminosity street light)!
4
Содержание Solarway 10
Страница 2: ...2 ...
