background image

PRODUCT INSTALLATION AND OPERATION INSTRUCTIONS

ATTENTION!

Time-controlled  operation  increases  the  life  span  of  the  battery.  It  is 

recommended to use the time control functions, or to turn off the light 

by the remote control if you do not need the lights to shine (e.g. at late 

night or break of dawn).
If you keep your finger for 4 seconds on the ON signal, the light switches 

to default mode (cold white light color, maximum power).
You can control 50 lights at the same time with the 2.4G remote control 

in  25  m  radius  (considering  no  obstacles  in  the  area,  and  sufficient 

charge in remote control’s batteries).

The batteries supplied for the remote control are recommended to be 

changed for rechargeable batteries once they reach the end of their life 

span.  PLEASE  PAY  ATTENTION:  THE  STAND-BY  MODE  OF  THE  REMOTE 

CONTROL,  AS  WELL  AS  THE  REGULAR  USE  OF  THE  REMOTE  CONTROL 

CONSUMES  A  DECENT  AMOUNT  OF  ENERGY.  IT  IS  RECOMMENDED  TO 

REMOVE  THE  BATTERIES  FROM  THE  REMOTE-CONTROL  UNIT  ONCE 

YOU CUSTOMIZED, AND SET UP YOUR LIGHT CORRECTLY, STORE THEM 

SEPARATELY,  AND  ONLY  PUT  THEM  BACK  IN  THE  REMOTE  CONTROL 

WHEN YOU NEED THE REMOTE CONTROL!
The  light  blinks  2  times  when  it  receives  any  of  the  time-controlled 

operation commands.

It is recommended to reduce the power of the light in case of constantly 

cloudy, rainy, overcast, cold weather days, if longer operation is needed 

during night-time.
If the light does not receive the commands of the remote-control unit, 

please restart the light system. You can do it by clicking the main ON/

OFF button 2 times (turning OFF and ON the light) located at the top part 

of the column inside, like it is described above in chapter “Installation of 

the light” (paragraph 5). If the light still does not react on the commands 

of the remote control, please change the batteries in the remote control 

since the cause could be discharged or faulted batteries.
To  maximize  the  discharge  time  of  your  light,  and  preserve  its  good 

aesthetical  outlook,  please  follow  the  instructions  given  in  “Cleaning 

instructions”  (please  find  this  chapter  below).  PLEASE  PAY  EXTRA 

ATTENTION TO THE RIGHT CLEANING METHOD OF THE POLYCARBONATE 

PARTS (DOME)!

7

Содержание AMETHYST 90















Отзывы: