8
※
Remove the filter,which protects the fan against dust and dirt,from time to time and clean it.
※
Check the state of the fluid filter from time to time and clean or replace it when necessary.
※
After several hours of operation,some droplets of condensation will have formed at the nozzle.
That is normal and not a malfunction.
※
Remove fluid droplets at the nozzle only when the machine has completely cooled off.
※
Please keep the liquid clean,do not put in other material. Do not using the contaminate liquid.
Please lid the bottle after putting in the liquid.
※
Please note: The vaporizer of our machines does not have to be cleaned! If open and clean by
yourself not professional and damage the vaporizer,we can not grant warranty in this case.
9.
Trouble-shooting
Trouble: The pump runs, but little or no smoke is produced.
Cause: The pump sucks no or too little fluid.
· Check whether the canister is empty
· Check whether the brass collar is properly connected with the brass oupling
· Check whether the fluid filter in the canister is clogged
· Check whether the fluid tube is twisted or defective
Trouble: The console can’t be controlled normally.
Cause: Connection from the machine to the console is faulty.
· Check whether the plug is plugged in correctly
· Check whether the cable is defective
· Check whether the DMX start address is adjusted correctly
· If just some console can’t be controlled normally,please exchange the XLR house line and
signal line.
Trouble: During operation the machine fail to work for a long time
Cause: The over-temperature protection device is activated.
· Check whether the fan is clogged
·Turn off the power for a moment,then turn on the power again.
Trouble 4: The vaporizer is clogged
.
·Please send the machine to the service-station or your local dealer.
10.Specifications
Power:2000W
Voltage: AC220-250V 50/60Hz
Fuse:15A
Heat up time: 3.5mins
Fog Liquid tank:2L
Fog Liquid consumption:25ml per minute (100% output)
Water consumption:220ml per minute (100% output)
Smoke output:100m
2
/ min
